RETURN SPEED can be equipped with 2 different types of magazines:

SINGLE COLUMN MAGAZINE, has a surface that tilts from 0 to 25, manually adjustable, width 1600 mm, with an unloading depth of 800 mm where the pieces are unloaded in a single row. This type of magazine can unload lengths from a minimum of 150mm to a maximum of 1500mm with diameters ranging from 10mm to maximum counter-spindle diameter. Proximity sensors control piece unloading and when the magazine is full, a fence protects the unloading area so that the operator cannot access areas with moving parts. The magazine is covered with a plastic polypropylene material to avoid damaging the unloaded piece. MULTI-COLUMN MAGAZINE, has a manually adjustable table that tilts from 0 to 25, 1600 mm wide with a piece unloading depth of 800 mm where the pieces are placed on multiple rows to cover the total length of 1600mm. This type of magazine can have a maximum of five columns and allows pieces from a min 150mm to a max 1500mm to be unloaded:

• with 1 column it can work from 150mm to 1500mm
• with 2 columns it can work from 150mm to 720mm
• with 3 columns it can work from 150mm to 450mm
• with 4 columns it can work from 150mm to 375mm
• with 5 columns it can work from 150mm to 275mm

This type of magazine can unload diameters ranging from 10mm to maximum lathe counter-spindle diameter. Proximity sensors control piece unloading and when the magazine is full, a fence protects the unloading area so that the operator cannot access areas with moving parts. The magazine is covered with a plastic polypropylene material to avoid damaging the unloaded piece.

AUTOMATIC MANAGEMENT

The management of the RETURN SPEED unloaded is entrusted to a PLC touch-screen, which interacts with a Brushless motor and with solenoid valves, to regulate the feed speed, the thrust force and all the automations.

LATHE LOADER INTERFACE

STANDARD TUBE, direct interface between loader and lathe, is a structured tube that can be supplied in different lengths covered with polyurethane material of the maximum counter-spindle bar passage

DRIVE SYSTEM

To insert reductions in the lathe counter-spindle, RETURN SPEED is equipped with a drive system that makes axial movement of about 800 mm possible. The loader is secured on its tracks by means of a quick coupling.

PIECE UNLOADING

RETURN SPEED unloads the piece by means of a pneumatic clamp protected in plastic material that blocks the piece to be unloaded and the position on the polythene channel at the unloading level where the subsequent rotation of the channel makes the piece roll onto the unloading magazine. This system (top automazioni patent) allows the piece to be unloaded into several magazine positions, increasing the number of pieces that can be unloaded by RETURN SPEED.

PIECE MANAGEMENT

RETURN SPEED has the ability to unload pieces from a min of 150mm up to a maximum of 1500mm and diameters ranging from 10 to 80. The work piece is unloaded in 23 sec. by an elastic clamp or magnet upon customer request. All the sockets and movements are performed by clamps or manipulators covered with plastic material to protect the piece finish.

QUADRO ELETTRICO / INTERFACCIA

RETURN SPEED includes an electrical system entirely designed and assembled in Top Automazioni with high quality brands such as: Phoenix, Eaton, Esa, Siboni. TOP AUTOMAZIONI includes any interface required by the lathe on its loaders wired to the specifications of the lathe manufacturers such as: 24-pole interface, profibus interface, ethercat interface, modular multipolar interface.